Friday, 31 May 2013

Understanding Submersible Pump Accessories

For industrial purposes, submersible water pumps no doubt makes for a better and more efficient option to bank on. Widely used in the industrial sector for its beneficial features, these pumps are sealed closely which allows it to be submerged in fluid content without trouble. The primary advantage of using this water pump is that it helps stop cavitation, added with its characteristic of pushing the fluid towards the surface instead of pulling it. When compared with jet pumps, these packaged pumping systems do make for a more handy and helpful solution.

Usage of Submersible Pumps
Growing in popularity largely, this system of pumping is used in various applications such as sewage, oil well, drainage, general industrial purposes and many more. It is also functional in other activities including fire fighting, irrigation, drilling, and mining, aquarium filters etc. that makes the entire process organized, systematic and effective at its best.

Even though the infrastructure and feature of this industrial water pump has changed and evolved dramatically over the years, the basic operational process of this device remains the same. With proper focus and attention given to the rotational speed as the chief mechanism, submersible water pumps successfully converts kinetic energy to pressure on the produced liquids.
Read Full Article: Understanding Submersible Pump Accessories

Thursday, 30 May 2013

How to Keep the Sewage Ejector Pumps Clean

Is it not your desire to keep the house clean?
Do you not wish to keep all the dirt as far from your home as possible? The answer will have to be a yes. Nobody wants debris and waste floating around his or her homes. However there are areas that can never be reached and therefore remain uncleaned if the conventional methods of cleaning and vacuuming are used. These are places beneath the septic tank and the sewer pipes. These are places, which lie very low and therefore unreachable. Hiring professional cleaners proves to be quite expensive since this is a process, which has to be repeated at regular intervals. An effective and economical solution to this problem is by way of getting a sewage ejector pump.

The purpose of getting the sewage ejector pump installed


The function of the sewage ejector will be to pump up the waste that is stuck below the sewage line and the septic tank. This accumulation of waste normally occurs owing to the keeping of the sewer line above the bathrooms. The role of the sewage ejector pump is to push up the wastewater to the level of the sewer line. This ejector pump is also installed in homes where the bathrooms are on the same level as the septic tank or even above it. In short, these pumps are required at any place where the sewer water is not flowing to the optimum level.

Read Full Article : How to Keep the Sewage Ejector Pumps Clean

Wednesday, 22 May 2013

Considerations For Buying A Submersible Pump

Submersible pumps are advantageous water pumping machines because they carry the function of lifting liquids when still submerged in water. The best examples of these equipments are sump pumps. They are used mainly in residential premises but are also used in well, fountain and borehole pumps. Though there are many benefits attached to the use of these machines, but the most important benefit is that they are self-priming in nature. Also, this machine has to do less work than any other machines because it is closer to the liquid being pumped.

When you have decided to buy a submersible pump for your use, do a comprehensive research before purchasing so that you end up buying the right machine. The following tips mentioned here will certainly help you in making a smart choice.
  • First of all, you need to decide the purpose of buying the pumping machine. There are different types of pumps available in the market. So, analyze your requirement properly before making a choice. For example, if you have to remove water from a flooded area, you need one that has high power so that water can be cleared quickly from the flooded area.
  • Ensure that the submersible pump you choose is made up of good housing material. It is because; this machine only works when it is submerged in water. So, the housing material must be made up of a non-corrosive alloy. You must avoid metal that rusts easily. Stainless steel and bronze alloy are preferred choice among users because they endure the test of time.
  • Another point that you must consider is the length of the power cord. If you will use an extension cord for running the pump, there are strong chances of fire. So, it is imperative for you to choose one that has a long power cord. The length of the power cord varies from 2 to 25 feet and you must choose the length according to the positioning of the pumping machine.
  • With the advent of the latest techniques, a lot of betterment has taken place in pumping industry. Manufacturers try to add many user-friendly features in pumping machines. So, when you are out in the market choosing the best one for your use, compare the features available in different models. Buy one that has the best features in it.
  • Smart buyers always prefer comparing prices before making a confirmed decision. So, you too must also be a smart buyer and choose to buy from a manufacturer who offers you affordable pricing.
  • Last but not the least, look for a manufacturer who offers warranties on products.
While buying a submersible pump, prefer sticking to these tips if you want to make a good purchase.

Tuesday, 7 May 2013

How Sump Pumps Can Prevent Flooding In Your Basement

Submersible sump pumps are pumping machines which are submerged in the water and push the water towards the surface. They are used for removing the accumulated water which appears from the natural underground water. The various kinds of pumps – submersible and pedestal – can be used in different kinds of appliances like borehole pumps, fountains and wells for smooth functioning across various industries.

Application of Sump Pumps

A sump pump is used in a variety of appliances by commercial and residential users. The single stage pumps are usually used for general industrial pumping, drainage and sewage pumping, but the multistage submersible pumps are put within the borehole for the purpose of water abstraction, oil wells and water wells. This equipment is also used for solving other purposes such as the sewage treatment plants, borehole pumping and drilling, ground water pumping and sea water handling. You need to be careful while using the pumps for some liquids which are polluted with combustible substances. In this case, specific pumping machines are designed.

How do Packaged Pump Systems Work?


Submersible pumps are also multistage eccentric pumps that move vertically. Despite their operational and constructional features undergoing continual enlargement down the years, the basic mode of operation remains the same. Submersible sump pumps work with the help of centrifugal force which is created with the high-speed impeller by losing the kinetic energy within the diffuser which converts the kinetic energy into pressure. This is the primary principle of mixed and radial flow pumping systems.

Read full article here: http://goo.gl/c6aNg

Monday, 6 May 2013

Basement Sump Pump Problems and Solutions

Sump pumps are devices which are installed in homes and buildings that are prone to flooding. They are usually installed in the low-lying areas of homes to eliminate the risk of flooding.

In most cases, this means the basement. Although these pumps are tensile and durable, there may be a malfunction occasionally. It is quite easy to replace or repair these pumps with the right type of tools and information.

The Two Common Types of Sump Pumps
There are basically two types of pumps which are installed in the sump pits. The submersible pumps and the pedestal pumps are the two common types of pumps which are commonly used.

Compared to the submersible sump pump, the pedestal pumps are less expensive. There are both automatic and manual pumps. Manual pumps are less convenient as they require constant monitoring.

Obviously, if the occupants of the home are away frequently, a manual unit might not be the best choice.

Read full article here: http://goo.gl/Mzbte

This piece of information is created and shared by Peter Moraitis. He is the National Sales Manager at Fura Inc. He loves to share his knowledge about Industrial water pumps and systems through his writing. Read more about Fura Inc.

Monday, 22 April 2013

Why Use Slurry Pumps?



Slurry pumps are robust and heavier versions of centrifugal pumps that are utilized to handle abrasive or tough applications. A typical centrifugal pump is used mainly for pulling out liquids, whereas slurry pumps are used for hydraulic transportation of solids. "Slurry Pump" is essentially a device used in transporting clay, mud, sand and silt in the size range of up to two millimeters. Sand pumps handle gravel and shingle transportation in the two to eight millimeter range, while gravel pumps can transport solids of up to fifty millimeter size. Dredge pumps, on the other hand, are used to handle solids up to or more than fifty millimeters.

Installation:
Depending on the use, the pump can be installed wet, semi-dry or dry. Almost all horizontal slurry pumps are fitted dry with the drive and bearings protected from the slurry. Vertical tanks are also fitted dry. The pump casing, in such cases, is mounted right under the tank. Slurry is expelled horizontally and is fed from the tank. No sunken bearings are needed in such designs.

Semi-dry pumps come with special configurations. Some of them are used with flooded bearings. However, special sealing considerations have to be made for flooded bearings in such pumps. On the other hand, wet installations are required when there is a need for a completely submersed pump. These machines are used for lifting slurry from the sump where there is a highly fluctuating slurry level.

Before buying a slurry pump, it is important to consider the kind of application so that you choose a model that will perform efficiently in different conditions. It is also important to buy these pumps from genuine manufacturers and retailers, who offer guarantee and expert advice to make the selection process easy. The slurry pump usage and conditions, under which it can function, must be carefully understood before determining the exact pump to utilize for the application.

This piece of information is created and shared by Peter Moraitis. He is the National Sales Manager at Fura Inc. He loves to share his knowledge about booster pumps and Industrial Pump repair through his writing. 

Monday, 15 April 2013

Tips for Buying Self Priming Centrifugal Pumps


Among all the pumps that are used in industrial units all around the globe, self priming centrifugal pumps are the simplest and widely used pumps. These pumps are designed for smooth operations and are used for transferring liquids from one point to another. A large number of manufacturing and industrial workshops including waste water plants, automotive, mining, petrochemical, food processing units and steel plants make use of these utility pumps. These pumps offer outstanding self priming performance even under extreme conditions.

You may be wondering whether self priming centrifugal pumps are the right solution for your application or not. Mentioned below are some of the factors that would help you understand whether they are suitable for your use or not.


1. The first factor is the number of starts and stops. If the number of starts and stops is high, a self priming function can offer more significant benefits over other pumps. This is because it has the ability to self prime without the presence of an attendant.

2. Secondly, self priming pumps are suitable for areas that are limited to operator access. They are mainly specified for applications in which no physical existence is required.

3. Thirdly, what is the desired rate flow? For the demand of a consistent flow of liquid, these pumps are best because there is little or no time to halt a process to shut down and reprime the pump.

Once you are through with the right type of self priming centrifugal pumps for your application, there are many more things that you need to consider. In a nutshell, you must find about the

• Nature of the liquid that needs to be pumped
• Capacity of liquid to be pumped
• Suction conditions
• Discharge conditions
• Service conditions
• Maintenance
• Installation

On top all these tips, always buy pumps and packaged pumping systems for your industrial unit from a reputed manufacturer to help you offer uninterrupted services for long lasting years.

This piece of information is created and shared by Peter Moraitis. He is the National Sales Manager at Fura Inc. He loves to share his knowledge about submersible water pumps and systems through his writing. Read more about Fura Inc.